From: Christian Heller Date: Wed, 12 Jan 2022 23:43:04 +0000 (+0100) Subject: Add w530 setup. X-Git-Url: https://plomlompom.com/repos/do_day?a=commitdiff_plain;h=15171dcfb9e48aa0311fb77948478dbca48245fa;p=config Add w530 setup. --- diff --git a/bullseye/apt-mark/desktop b/bullseye/apt-mark/desktop new file mode 100644 index 0000000..f537318 --- /dev/null +++ b/bullseye/apt-mark/desktop @@ -0,0 +1,2 @@ +# so that grub learns about kernel updates +grub-pc diff --git a/bullseye/apt-mark/thinkpad b/bullseye/apt-mark/thinkpad new file mode 100644 index 0000000..6a780f2 --- /dev/null +++ b/bullseye/apt-mark/thinkpad @@ -0,0 +1,7 @@ +# for wifi +firmware-iwlwifi +# for tlp +tlp +tp-smapi-dkms +linux-headers-amd64 +# diff --git a/bullseye/apt-mark/w530 b/bullseye/apt-mark/w530 new file mode 100644 index 0000000..e69de29 diff --git a/bullseye/etc_files/thinkpad/etc/default/tlp b/bullseye/etc_files/thinkpad/etc/default/tlp new file mode 100644 index 0000000..b73846b --- /dev/null +++ b/bullseye/etc_files/thinkpad/etc/default/tlp @@ -0,0 +1,306 @@ +# ------------------------------------------------------------------------------ +# tlp - Parameters for power saving +# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html + +# Hint: some features are disabled by default, remove the leading # to enable +# them. + +# Set to 0 to disable, 1 to enable TLP. +TLP_ENABLE=1 + +# Operation mode when no power supply can be detected: AC, BAT. +# Concerns some desktop and embedded hardware only. +TLP_DEFAULT_MODE=AC + +# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE +# Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC. +TLP_PERSISTENT_DEFAULT=0 + +# Seconds laptop mode has to wait after the disk goes idle before doing a sync. +# Non-zero value enables, zero disables laptop mode. +DISK_IDLE_SECS_ON_AC=0 +DISK_IDLE_SECS_ON_BAT=2 + +# Dirty page values (timeouts in secs). +MAX_LOST_WORK_SECS_ON_AC=15 +MAX_LOST_WORK_SECS_ON_BAT=60 + +# Hint: CPU parameters below are disabled by default, remove the leading # +# to enable them, otherwise kernel default values are used. + +# Select a CPU frequency scaling governor. +# Intel Core i processor with intel_pstate driver: +# powersave(*), performance. +# Older hardware with acpi-cpufreq driver: +# ondemand(*), powersave, performance, conservative, schedutil. +# (*) is recommended. +# Hint: use tlp-stat -p to show the active driver and available governors. +# Important: +# powersave for intel_pstate and ondemand for acpi-cpufreq are power +# efficient for *almost all* workloads and therefore kernel and most +# distributions have chosen them as defaults. If you still want to change, +# you should know what you're doing! You *must* disable your distribution's +# governor settings or conflicts will occur. +#CPU_SCALING_GOVERNOR_ON_AC=powersave +#CPU_SCALING_GOVERNOR_ON_BAT=powersave + +# Set the min/max frequency available for the scaling governor. +# Possible values strongly depend on your CPU. For available frequencies see +# the output of tlp-stat -p. +#CPU_SCALING_MIN_FREQ_ON_AC=0 +#CPU_SCALING_MAX_FREQ_ON_AC=0 +#CPU_SCALING_MIN_FREQ_ON_BAT=0 +#CPU_SCALING_MAX_FREQ_ON_BAT=0 + +# Set energy performance hints (HWP) for Intel P-state governor: +# performance, balance_performance, default, balance_power, power +# Values are given in order of increasing power saving. +# Note: Intel Skylake or newer CPU and Kernel >= 4.10 required. +CPU_HWP_ON_AC=balance_performance +CPU_HWP_ON_BAT=balance_power + +# Set Intel P-state performance: 0..100 (%). +# Limit the max/min P-state to control the power dissipation of the CPU. +# Values are stated as a percentage of the available performance. +# Requires an Intel Core i processor with intel_pstate driver. +#CPU_MIN_PERF_ON_AC=0 +#CPU_MAX_PERF_ON_AC=100 +#CPU_MIN_PERF_ON_BAT=0 +#CPU_MAX_PERF_ON_BAT=30 + +# Set the CPU "turbo boost" feature: 0=disable, 1=allow +# Requires an Intel Core i processor. +# Important: +# - This may conflict with your distribution's governor settings +# - A value of 1 does *not* activate boosting, it just allows it +#CPU_BOOST_ON_AC=1 +#CPU_BOOST_ON_BAT=0 + +# Minimize number of used CPU cores/hyper-threads under light load conditions: +# 0=disable, 1=enable. +SCHED_POWERSAVE_ON_AC=0 +SCHED_POWERSAVE_ON_BAT=1 + +# Kernel NMI Watchdog: +# 0=disable (default, saves power), 1=enable (for kernel debugging only). +NMI_WATCHDOG=0 + +# Change CPU voltages aka "undervolting" - Kernel with PHC patch required. +# Frequency voltage pairs are written to: +# /sys/devices/system/cpu/cpu0/cpufreq/phc_controls +# CAUTION: only use this, if you thoroughly understand what you are doing! +#PHC_CONTROLS="F:V F:V F:V F:V" + +# Set CPU performance versus energy savings policy: +# performance, balance-performance, default, balance-power, power. +# Values are given in order of increasing power saving. +# Requires kernel module msr and x86_energy_perf_policy from linux-tools. +ENERGY_PERF_POLICY_ON_AC=performance +ENERGY_PERF_POLICY_ON_BAT=power + +# Disk devices; separate multiple devices with spaces (default: sda). +# Devices can be specified by disk ID also (lookup with: tlp diskid). +DISK_DEVICES="sda sdb" + +# Disk advanced power management level: 1..254, 255 (max saving, min, off). +# Levels 1..127 may spin down the disk; 255 allowable on most drives. +# Separate values for multiple disks with spaces. Use the special value 'keep' +# to keep the hardware default for the particular disk. +DISK_APM_LEVEL_ON_AC="254 254" +DISK_APM_LEVEL_ON_BAT="128 128" + +# Hard disk spin down timeout: +# 0: spin down disabled +# 1..240: timeouts from 5s to 20min (in units of 5s) +# 241..251: timeouts from 30min to 5.5 hours (in units of 30min) +# See 'man hdparm' for details. +# Separate values for multiple disks with spaces. Use the special value 'keep' +# to keep the hardware default for the particular disk. +#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0" +#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0" + +# Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq). +# Separate values for multiple disks with spaces. Use the special value 'keep' +# to keep the kernel default scheduler for the particular disk. +#DISK_IOSCHED="cfq cfq" + +# AHCI link power management (ALPM) for disk devices: +# min_power, med_power_with_dipm(*), medium_power, max_performance. +# (*) Kernel >= 4.15 required, then recommended. +# Multiple values separated with spaces are tried sequentially until success. +SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance" +SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power" + +# Exclude host devices from AHCI link power management. +# Separate multiple hosts with spaces. +#SATA_LINKPWR_BLACKLIST="host1" + +# Runtime Power Management for AHCI host and disks devices: +# on=disable, auto=enable. +# EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss. +#AHCI_RUNTIME_PM_ON_AC=on +#AHCI_RUNTIME_PM_ON_BAT=on + +# Seconds of inactivity before disk is suspended. +AHCI_RUNTIME_PM_TIMEOUT=15 + +# PCI Express Active State Power Management (PCIe ASPM): +# default, performance, powersave. +PCIE_ASPM_ON_AC=performance +PCIE_ASPM_ON_BAT=powersave + +# Radeon graphics clock speed (profile method): low, mid, high, auto, default; +# auto = mid on BAT, high on AC; default = use hardware defaults. +RADEON_POWER_PROFILE_ON_AC=high +RADEON_POWER_PROFILE_ON_BAT=low + +# Radeon dynamic power management method (DPM): battery, performance. +RADEON_DPM_STATE_ON_AC=performance +RADEON_DPM_STATE_ON_BAT=battery + +# Radeon DPM performance level: auto, low, high; auto is recommended. +RADEON_DPM_PERF_LEVEL_ON_AC=auto +RADEON_DPM_PERF_LEVEL_ON_BAT=auto + +# WiFi power saving mode: on=enable, off=disable; not supported by all adapters. +WIFI_PWR_ON_AC=off +WIFI_PWR_ON_BAT=on + +# Disable wake on LAN: Y/N. +WOL_DISABLE=Y + +# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs). +# A value of 0 disables, >=1 enables power saving (recommended: 1). +SOUND_POWER_SAVE_ON_AC=0 +SOUND_POWER_SAVE_ON_BAT=1 + +# Disable controller too (HDA only): Y/N. +SOUND_POWER_SAVE_CONTROLLER=Y + +# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable. +# Drive can be powered on again by releasing (and reinserting) the eject lever +# or by pressing the disc eject button on newer models. +# Note: an UltraBay/MediaBay hard disk is never powered off. +BAY_POWEROFF_ON_AC=0 +BAY_POWEROFF_ON_BAT=0 +# Optical drive device to power off (default sr0). +BAY_DEVICE="sr0" + +# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable. +RUNTIME_PM_ON_AC=on +RUNTIME_PM_ON_BAT=auto + +# Exclude PCI(e) device adresses the following list from Runtime PM +# (separate with spaces). Use lspci to get the adresses (1st column). +#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6" + +# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM. +# Default when unconfigured is "amdgpu nouveau nvidia radeon" which +# prevents accidential power-on of dGPU in hybrid graphics setups. +# Use "" to disable the feature completely. +# Separate multiple drivers with spaces. +#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon" + +# Set to 0 to disable, 1 to enable USB autosuspend feature. +USB_AUTOSUSPEND=1 + +# Exclude listed devices from USB autosuspend (separate with spaces). +# Use lsusb to get the ids. +# Note: input devices (usbhid) are excluded automatically +#USB_BLACKLIST="1111:2222 3333:4444" + +# Bluetooth devices are excluded from USB autosuspend: +# 0=do not exclude, 1=exclude. +USB_BLACKLIST_BTUSB=0 + +# Phone devices are excluded from USB autosuspend: +# 0=do not exclude, 1=exclude (enable charging). +USB_BLACKLIST_PHONE=0 + +# Printers are excluded from USB autosuspend: +# 0=do not exclude, 1=exclude. +USB_BLACKLIST_PRINTER=1 + +# WWAN devices are excluded from USB autosuspend: +# 0=do not exclude, 1=exclude. +USB_BLACKLIST_WWAN=1 + +# Include listed devices into USB autosuspend even if already excluded +# by the blacklists above (separate with spaces). +# Use lsusb to get the ids. +#USB_WHITELIST="1111:2222 3333:4444" + +# Set to 1 to disable autosuspend before shutdown, 0 to do nothing +# (workaround for USB devices that cause shutdown problems). +#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1 + +# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown +# on system startup: 0=disable, 1=enable. +# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below +# are ignored when this is enabled! +RESTORE_DEVICE_STATE_ON_STARTUP=0 + +# Radio devices to disable on startup: bluetooth, wifi, wwan. +# Separate multiple devices with spaces. +#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan" + +# Radio devices to enable on startup: bluetooth, wifi, wwan. +# Separate multiple devices with spaces. +#DEVICES_TO_ENABLE_ON_STARTUP="wifi" + +# Radio devices to disable on shutdown: bluetooth, wifi, wwan. +# (workaround for devices that are blocking shutdown). +#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan" + +# Radio devices to enable on shutdown: bluetooth, wifi, wwan. +# (to prevent other operating systems from missing radios). +#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan" + +# Radio devices to enable on AC: bluetooth, wifi, wwan. +#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan" + +# Radio devices to disable on battery: bluetooth, wifi, wwan. +#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan" + +# Radio devices to disable on battery when not in use (not connected): +# bluetooth, wifi, wwan. +#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan" + +# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module +# required). Charging starts when the remaining capacity falls below the +# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value. +# Main / Internal battery (values in %) +START_CHARGE_THRESH_BAT0=75 +STOP_CHARGE_THRESH_BAT0=80 +# Ultrabay / Slice / Replaceable battery (values in %) +#START_CHARGE_THRESH_BAT1=75 +#STOP_CHARGE_THRESH_BAT1=80 + +# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable. +#RESTORE_THRESHOLDS_ON_BAT=1 + +# ------------------------------------------------------------------------------ +# tlp-rdw - Parameters for the radio device wizard +# Possible devices: bluetooth, wifi, wwan. + +# Hints: +# - Parameters are disabled by default, remove the leading # to enable them +# - Separate multiple radio devices with spaces + +# Radio devices to disable on connect. +#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan" +#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan" +#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi" + +# Radio devices to enable on disconnect. +#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan" +#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT="" +#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT="" + +# Radio devices to enable/disable when docked. +#DEVICES_TO_ENABLE_ON_DOCK="" +#DEVICES_TO_DISABLE_ON_DOCK="" + +# Radio devices to enable/disable when undocked. +#DEVICES_TO_ENABLE_ON_UNDOCK="wifi" +#DEVICES_TO_DISABLE_ON_UNDOCK="" diff --git a/bullseye/etc_files/thinkpad/etc/systemd/logind.conf b/bullseye/etc_files/thinkpad/etc/systemd/logind.conf new file mode 100644 index 0000000..1098229 --- /dev/null +++ b/bullseye/etc_files/thinkpad/etc/systemd/logind.conf @@ -0,0 +1,6 @@ +# This file is part of systemd. +# +# See logind.conf(5) for details. + +[Login] +HandleLidSwitch=hibernate diff --git a/bullseye/home_files/minimal/.bashrc b/bullseye/home_files/minimal/.bashrc new file mode 100644 index 0000000..5ee9ad8 --- /dev/null +++ b/bullseye/home_files/minimal/.bashrc @@ -0,0 +1,26 @@ +# Settings for interactive shells. + +# Fancy colors for ls. +alias ls="ls --color=auto" + +# Use vim as default editor for anything. +export VISUAL=vim +export EDITOR=$VISUAL + +# Colored prompt with username, hostname, date/time, directory. +colornumber=7 # Default to white if no color set via colornumber dotfile. +colornumber_file=~/.shell_prompt_color +if [ -f $colornumber_file ]; then + colornumber=`cat $colornumber_file` +fi +tput_color="$(tput setaf $colornumber)$(tput bold)" +tput_reset="$(tput sgr0)" +# Bash confuses the line length when not told to not count escape sequences. +if [ ! "$BASH" = "" ]; then + tput_color="\[$tput_color\]" + tput_reset="\[$tput_reset\]" +fi +PS1="${tput_color}["\$\(date\ +%Y-%m-%d/%H:%M:%S/%Z\)" $(whoami)@$(hostname):"\$\(pwd\)"]$ $tput_reset" +PS2="${tput_color}> $tput_reset" +PS3="${tput_color}select: $tput_reset" +PS4="${tput_color}+ $tput_reset" diff --git a/bullseye/home_files/user/.Xresources b/bullseye/home_files/user/.Xresources new file mode 100644 index 0000000..45b10af --- /dev/null +++ b/bullseye/home_files/user/.Xresources @@ -0,0 +1,56 @@ +! otherwise various applications will assume merely 8 colors +XTerm.termName: xterm-256color + +! font +! actually, "mono" is already the default for faceName (it will +! pick whatever fc-match mono delivers), but we need to set _some_ +! faceName to trigger XTerm activating TrueType fonts +! (XTerm*fontRender by itself won't do the trick), and we want +! TrueType fonts because, well, they scale better, and XTerm lets them +! fall back on alternatives (hi there ttf-unifont) when a Unicode +! glyph is not found +XTerm*faceName: mono + +! white on black +XTerm*reverseVideo: on + +! blink screen instead of sound +XTerm*visualBell: on + +! proper ALT as META key treatment +XTerm*eightBitInput: false + +! font sizes +XTerm*faceSize: 8 +XTerm*faceSize1: 4 +XTerm*faceSize2: 5 +XTerm*faceSize3: 6 +XTerm*faceSize4: 8 +XTerm*faceSize5: 14 +XTerm*faceSize6: 25 + +! colors +! black +XTerm*color0: #202020 +XTerm*color8: #3F3F3F +! red +XTerm*color1: #A82020 +XTerm*color9: #E82020 +! green +XTerm*color2: #20A820 +XTerm*color10: #20E820 +! yellow +XTerm*color3: #A8A820 +XTerm*color11: #E8E820 +! blue +XTerm*color4: #3F3FFF +XTerm*color12: #9F9FFF +! magenta +XTerm*color5: #A83FFF +XTerm*color13: #E89FFF +! cyan +XTerm*color6: #3FA8FF +XTerm*color14: #9FE8FF +! white +XTerm*color7: #A8A8A8 +XTerm*color15: #E8E8E8 diff --git a/bullseye/home_files/user/.borgrepos b/bullseye/home_files/user/.borgrepos new file mode 100644 index 0000000..c40eee3 --- /dev/null +++ b/bullseye/home_files/user/.borgrepos @@ -0,0 +1,4 @@ +plom@plomlompom.com +plom@mail.plomlompom.com +plom@play.plomlompom.com +# file read ends at last newline diff --git a/bullseye/home_files/user/.config/i3/config b/bullseye/home_files/user/.config/i3/config new file mode 100644 index 0000000..19c654e --- /dev/null +++ b/bullseye/home_files/user/.config/i3/config @@ -0,0 +1,83 @@ +# plomlompom's i3-wm configuration + +# Font for i3 text +font pango:Terminus 8px + +# Force "tabbed" as default layout for new windows. +workspace_layout tabbed + +# Make the Windows key the modifier key for all i3-wm actions. +set $mod Mod4 +floating_modifier $mod + +# Launch xterm. +bindsym $mod+Return exec xterm + +# Launch programs via dmenu. +bindsym $mod+d exec dmenu_run +bindsym $mod+x exec dmenu_run + +# Kill window. +bindsym $mod+Shift+Q kill + +# Move focus between windows. +bindsym $mod+Left focus left +bindsym $mod+Down focus down +bindsym $mod+Up focus up +bindsym $mod+Right focus right + +# Don't move focus with mouse. +focus_follows_mouse no + +# Move windows. +bindsym $mod+Shift+Left move left +bindsym $mod+Shift+Down move down +bindsym $mod+Shift+Up move up +bindsym $mod+Shift+Right move right + +# Resize windows +bindsym $mod+h resize shrink width 1 px or 1 ppt +bindsym $mod+l resize grow width 1 px or 1 ppt +bindsym $mod+j resize shrink height +bindsym $mod+k resize grow height + +# Toggle fullscreen for focused window. +bindsym $mod+f fullscreen + +# Toggle floating of window, focus on floating or tabbed windows. +bindsym $mod+Shift+space floating toggle +bindsym $mod+space focus mode_toggle + +# Switch to workspace x. +bindsym $mod+1 workspace 1 +bindsym $mod+2 workspace 2 +bindsym $mod+3 workspace 3 +bindsym $mod+4 workspace 4 +bindsym $mod+5 workspace 5 +bindsym $mod+6 workspace 6 +bindsym $mod+7 workspace 7 +bindsym $mod+8 workspace 8 +bindsym $mod+9 workspace 9 +bindsym $mod+0 workspace 10 + +# Move window to workspace x. +bindsym $mod+Shift+exclam move workspace 1 +bindsym $mod+Shift+quotedbl move workspace 2 +bindsym $mod+Shift+section move workspace 3 +bindsym $mod+Shift+dollar move workspace 4 +bindsym $mod+Shift+percent move workspace 5 +bindsym $mod+Shift+ampersand move workspace 6 +bindsym $mod+Shift+slash move workspace 7 +bindsym $mod+Shift+parenleft move workspace 8 +bindsym $mod+Shift+parenright move workspace 9 +bindsym $mod+Shift+equal move workspace 10 + +# Reload i3 config file, restart (keeping sesion) i3, exit i3. +bindsym $mod+Shift+C reload +bindsym $mod+Shift+R restart +bindsym $mod+Shift+P exit + +# Select "i3status" as i3 status bar. +bar { + status_command i3status +} diff --git a/bullseye/home_files/user/.emacs.d/init.el b/bullseye/home_files/user/.emacs.d/init.el new file mode 100644 index 0000000..fbec980 --- /dev/null +++ b/bullseye/home_files/user/.emacs.d/init.el @@ -0,0 +1,323 @@ +;; general layout +;; ============== + +;; need no stinkin emacs help screen as start up, and no menu bar +(setq inhibit-startup-screen t) +(menu-bar-mode -1) + +;; highlight cursor line, parentheses +(global-hl-line-mode 1) +(show-paren-mode 1) + +;; show line numbers, use separator space +(global-linum-mode) +(setq linum-format "%d ") + +;; count cursor column, row in mode line +(setq column-number-mode t) + +;; settings to make GUI tolerable +(if window-system + (progn + (add-to-list 'default-frame-alist '(foreground-color . "white")) + (add-to-list 'default-frame-alist '(background-color . "black")) + (set-face-attribute 'default nil :height 80) + (scroll-bar-mode -1) + (setq visible-bell t) + (setq linum-format "%d"))) + +;; use as default browser what XDG offers +(setq-default browse-url-browser-function 'browse-url-xdg-open) + + + +;; general keybindings +;; =================== + +;; create and use a minimal global map using just the self-insert command +;; bindings and a selection of some to me very common keystrokes +(setq minimal-map (make-sparse-keymap)) +(substitute-key-definition 'self-insert-command 'self-insert-command + minimal-map global-map) +(use-global-map minimal-map) +(global-set-key (kbd "DEL") 'backward-delete-char-untabify) +(global-set-key (kbd "RET") 'newline) +(global-set-key (kbd "TAB") 'indent-for-tab-command) +(global-set-key (kbd "") 'previous-line) +(global-set-key (kbd "") 'next-line) +(global-set-key (kbd "") 'left-char) +(global-set-key (kbd "") 'right-char) +(global-set-key (kbd "") 'scroll-down-command) +(global-set-key (kbd "") 'scroll-up-command) +(global-set-key (kbd "M-x") 'execute-extended-command) +(global-set-key (kbd "C-g") 'keyboard-quit) +;(global-set-key (kbd "") 'kmacro-start-macro-or-insert-counter) +;(global-set-key (kbd "") 'kmacro-end-or-call-macro) +;; note how to switch back to the original map: (use-global-map global-map) +(setq shr-map (make-sparse-keymap)) ; got annoying in elfeed-show on URLs + + + +;; minibuffer +;; ========== + +;; incremental minibuffer completion +(icomplete-mode 1) + + + +;; text editing +;; ============ + +;; tabs are evil +(setq-default indent-tabs-mode nil) +(setq-default tab-width 4) +(setq indent-line-function 'insert-tab) + +;; show trailing whitespace +(setq-default show-trailing-whitespace 1) + +;; on save, ask whether to ensure text file's last line ends in a +;; newline character +(setq require-final-newline 1) + +;; use dedicated directory for version-controlled, endless backups; +;; never delete old versions +(setq make-backup-files t + backup-directory-alist `(("." . "~/.emacs_backups")) + backup-by-copying t + version-control t + delete-old-versions 1) ;; neither t nor nil: never delete + + +;; package management +;; ================== + +;; where we get packages from +(setq package-archives '(("gnu" . "https://elpa.gnu.org/packages/") + ("melpa-unstable" . "https://melpa.org/packages/") + ("melpa-stable" . "https://stable.melpa.org/packages/"))) + +;; ensure certain packages are installed (actually, we use Debian repos here) +;; credit to +;(setq package-list '(elfeed ledger-mode)) +;(package-initialize) +;(dolist (package package-list) +; (unless (package-installed-p package) +; (package-install package))) + + + +;;; window management +;;; ================= +; +;;; track window configurations to allow window config undo +;(winner-mode 1) + + + +;; mail setup +;; ========== + +(setq send-mail-function 'smtpmail-send-it) +(setq smtpmail-smtp-server "mail.plomlompom.com") +(setq smtpmail-smtp-service 465) +(setq smtpmail-stream-type 'ssl) +(setq smtpmail-smtp-user "plom") +(setq mml-secure-openpgp-encrypt-to-self t) +(add-hook 'message-setup-hook 'mml-secure-sign-pgpmime) + +;(setq gnutls-log-level 0) + +;; if we don't set this, we get this warning: +;; gnutls.c: [1] Note that the security level of the Diffie-Hellman key exchange +;; has been lowered to 256 bits and this may allow decryption of the session data +(setq gnutls-min-prime-bits 1024) + +;; there is a WEIRD bug somewhere in /network-stream-open-tls/ that disappears the +;; stream process, seemingly unless the /message/ function is called at the right +;; place (earliest in /nsm-verify-connection/ right before the "cond" there, latest +;; in /network-stream-get-response/ right after "(goto-char start)"; this works +;; unless /inhibit_message/ is set, indicating that writing to the *Messages* +;; buffer is not relevant, but maybe writing to the echo area is); activing the +;; gnutls logging is just a hack to achieve such calls to /message/ in the +;; /network-stream-open-tls/ flow. +(setq gnutls-log-level 1) ; miraculously makes smtpmail work + +;; constructs From: domain if mail composer directly called (from without +;; notmuch), but we don't actually intend to do that +;(setq mail-host-address "plomlompom.com") + +;; otherwise notmuch becomes extremely slow in some cases +(setq-default notmuch-show-indent-content nil) + +;; this only works if we use notmuch-mua-send instead of message-send +(setq notmuch-fcc-dirs '(("plom@plomlompom.com" . "maildir/Sent"))) + +;; this gets rid of "i-did-not-set--mail-host-address--so-tickle-me" +;; in the message ID +(setq mail-host-address "plomlompom.com") + +;; notmuch saved searches +(setq notmuch-saved-searches + '((:name "inbox" :query "tag:unread and folder:inbox") + (:name "all" :query "tag:unread not folder:maildir/Trash") + (:name "plomlompom.de" :query "tag:unread and folder:maildir/plomlompom.de") + (:name "nebenan" :query "tag:unread and folder:maildir/nebenan") + (:name "reflect-info" :query "tag:unread and folder:maildir/reflect-info") + (:name "gmail" :query "tag:unread and folder:maildir/gmail.com") + (:name "mutter" :query "tag:unread and folder:maildir/mutter"))) + + + +;; org mode +;; ======== + +;; unsure why, but to re-set the key map, we not only have to explicitely do it +;; only after org-mode loading, but also have to explicitely overwrite the +;; C-c keybinding; TODO: investigate +(with-eval-after-load 'org + (setq org-mode-map (make-sparse-keymap)) + (define-key org-mode-map (kbd "C-c") nil) + (define-key org-mode-map (kbd "TAB") 'org-cycle) + (define-key org-mode-map (kbd "") 'org-shifttab)) + +;; don't truncate lines by default +(setq org-startup-truncated nil) + +;; basic org-capture config +(setq org-capture-templates + '(("x" "test" plain (file "~/org/notes.org") "%T: %?"))) +(add-hook 'org-capture-mode-hook 'evil-insert-state) + +;; agenda view on startup +(load-library "find-lisp") +(setq org-agenda-files (find-lisp-find-files "~/org" "\.org$")) +(setq org-agenda-span 90) +(setq org-agenda-use-time-grid nil) +(add-hook 'emacs-startup-hook (lambda () + (org-agenda-list) + (switch-to-buffer "*Org Agenda*") + (other-window 1))) + +;;; for calendar, use ISO date style +;(setq calendar-date-style 'iso) +;(setq diary-number-of-entries 7) +;(diary) +;(setq org-agenda-time-grid '((today require-timed remove-match) +; #("----------------" 0 16 (org-heading t)) +; (0 200 400 600 800 1000 1200 +; 1400 1600 1800 2000 2200))) + +;; empty org-agenda-mode keybindings +(add-hook 'org-agenda-mode-hook + (lambda () + (setq org-agenda-mode-map (make-sparse-keymap)))) +(add-hook 'org-agenda-mode-hook + (lambda () + (use-local-map (make-sparse-keymap)))) + +;; org-publish-all +(setq org-publish-project-alist + '( + ("website" + :base-directory "~/org/web/" + :base-extension "org" + :publishing-directory "~/html/" + :recursive t + :publishing-function org-html-publish-to-html + :headline-levels 4 ; Just the default for this project. + :auto-preamble t + ))) + +;; use [ki:] syntax to hide stuff from exports +(defun classify-information (text backend info) + "Replaces '[ki:WHATEVER]' with '[klassifizierte Information]'." + (replace-regexp-in-string "\\[ki:[^\]]*\]" "[klassifizierte Information]" text)) +(add-hook 'org-export-filter-plain-text-functions 'classify-information) + +;; add HTML validator link to exports +(setq org-html-validation-link "Validate") + + + +;;; Info mode +;;; ========= + +(setq Info-mode-map (make-sparse-keymap)) +(define-key Info-mode-map (kbd "RET") 'Info-follow-nearest-node) +(define-key Info-mode-map (kbd "u") 'Info-up) +(define-key Info-mode-map (kbd "TAB") 'Info-next-reference) +(define-key Info-mode-map (kbd "") 'Info-prev-reference) +(define-key Info-mode-map (kbd "H") 'Info-history-back) +(define-key Info-mode-map (kbd "L") 'Info-history-forward) +(define-key Info-mode-map (kbd "I") 'Info-goto-node) +(define-key Info-mode-map (kbd "i") 'Info-index) + + + +;; help mode +;; ========= + +(setq help-mode-map (make-sparse-keymap)) +(define-key help-mode-map (kbd "TAB") 'forward-button) +(define-key help-mode-map (kbd "RET") 'help-follow) +(define-key help-mode-map (kbd "") 'backward-button) + + + +;; elfeed +;; ====== + +(require 'elfeed) ; needed so we can set the font faces +(set-face-background 'elfeed-search-title-face "magenta") +(set-face-background 'elfeed-search-unread-count-face "magenta") +(setq elfeed-feeds + '("https://capsurvival.blogspot.com/feeds/posts/default" + "https://jungle.world/rss.xml" + "http://news.dieweltistgarnichtso.net/bin/index.xml" + "https://taz.de/!s=&ExportStatus=Intern&SuchRahmen=Online;rss/" + "http://www.tagesschau.de/xml/atom")) +(setq elfeed-search-mode-map (make-sparse-keymap)) +(define-key elfeed-search-mode-map (kbd "RET") 'elfeed-search-show-entry) +(defun elfeed-search-mark-as-read() (interactive) + (elfeed-search-untag-all 'unread)) +(define-key elfeed-search-mode-map (kbd "r") 'elfeed-search-mark-as-read) +(define-key elfeed-search-mode-map (kbd "R") 'elfeed-search-tag-all-unread) +(define-key elfeed-search-mode-map (kbd "f") 'elfeed-search-live-filter) +(define-key elfeed-search-mode-map (kbd "u") 'elfeed-update) +(setq elfeed-show-mode-map (make-sparse-keymap)) +(define-key elfeed-show-mode-map (kbd "u") 'elfeed) +(define-key elfeed-show-mode-map (kbd "TAB") 'shr-next-link) +(define-key elfeed-show-mode-map (kbd "") 'shr-previous-link) +(define-key elfeed-show-mode-map (kbd "a") 'elfeed-show-prev) +(define-key elfeed-show-mode-map (kbd "d") 'elfeed-show-next) +(define-key elfeed-show-mode-map (kbd "y") 'shr-copy-url) +(define-key elfeed-show-mode-map (kbd "RET") 'shr-browse-url) + + + +;; eww +;; === + +(setq eww-mode-map (make-sparse-keymap)) +(define-key eww-mode-map (kbd "TAB") 'shr-next-link) +(define-key eww-mode-map (kbd "") 'shr-previous-link) +(define-key eww-mode-map (kbd "H") 'eww-back-url) +(define-key eww-mode-map (kbd "L") 'eww-forward-url) + + + +;; ledger +;; ====== +(setq ledger-mode-map (make-sparse-keymap)) +(define-key ledger-mode-map (kbd "TAB") 'ledger-magic-tab) + + + +;;; plomvi mode +;;; =========== + +(defvar plomvi-return-combo (kbd "C-c")) +(load "~/public_repos/plomvi.el/plomvi.el") +(plomvi-global-mode 1) diff --git a/bullseye/home_files/user/.gitconfig b/bullseye/home_files/user/.gitconfig new file mode 100644 index 0000000..8967d25 --- /dev/null +++ b/bullseye/home_files/user/.gitconfig @@ -0,0 +1,3 @@ +[user] + email = c.heller@plomlompom.de + name = Christian Heller diff --git a/bullseye/home_files/user/.mbsyncrc b/bullseye/home_files/user/.mbsyncrc new file mode 100644 index 0000000..6a0e5cd --- /dev/null +++ b/bullseye/home_files/user/.mbsyncrc @@ -0,0 +1,28 @@ +IMAPAccount plom +# Address to connect to +Host mail.plomlompom.com +User plom +# For some reason, mbsync doesn't accept a PassCmd output beyond 79 chars, +# therefore the pw in ~/.authinfo should not be longer than that. +PassCmd "cat ~/.authinfo | cut -d' ' -f8-" +SSLType IMAPS +AuthMechs LOGIN + +IMAPStore core-remote +Account plom + +MaildirStore core-local +# The trailing "/" is important +Path ~/mail/maildir/ +Inbox ~/mail/inbox/ + +Channel core +Master :core-remote: +Slave :core-local: +Patterns * +# Automatically create missing mailboxes, both locally and on the server +Create Both +# Save the synchronization state files in the relevant directory +SyncState * +# If a mail is marked T ("Trashed") or deleted, remove it for real everywhere +Expunge Both diff --git a/bullseye/home_files/user/.notmuch-config b/bullseye/home_files/user/.notmuch-config new file mode 100644 index 0000000..9532761 --- /dev/null +++ b/bullseye/home_files/user/.notmuch-config @@ -0,0 +1,9 @@ +[database] +path=/home/plom/mail +[search] +exclude_tags=deleted;spam; +# the fields below set the From: if the mail composer is called from +# within notmuch +[user] +name=Christian Heller +primary_email=plom@plomlompom.com diff --git a/bullseye/home_files/user/.shell_prompt_color b/bullseye/home_files/user/.shell_prompt_color new file mode 100644 index 0000000..0cfbf08 --- /dev/null +++ b/bullseye/home_files/user/.shell_prompt_color @@ -0,0 +1 @@ +2 diff --git a/bullseye/home_files/user/.tridactylrc b/bullseye/home_files/user/.tridactylrc new file mode 100644 index 0000000..e39e5a0 --- /dev/null +++ b/bullseye/home_files/user/.tridactylrc @@ -0,0 +1,13 @@ +sanitize tridactyllocal tridactylsync +guiset statuspanel top-right +guiset tabs autohide +set newtab file:///opt/firefox/blank.html +autocmd DocStart www.reddit.com urlmodify -t www.reddit old.reddit +bind / fillcmdline find +bind n findnext 1 +bind N findnext -1 +set findcase insensitive +bind j scrollline 3 +bind k scrollline -3 +set hintuppercase false +set searchengine duckduckgo diff --git a/bullseye/home_files/user/.xinitrc b/bullseye/home_files/user/.xinitrc new file mode 100644 index 0000000..c7a0a66 --- /dev/null +++ b/bullseye/home_files/user/.xinitrc @@ -0,0 +1,17 @@ +# X init configuration + +# Set keymap. +setxkbmap de + +# Map CapsLock to Compose key. +xmodmap -e "clear Lock" +xmodmap -e "keycode 66 = Multi_key" + +# Load xterm settings +xrdb -merge ~/.Xresources + +# Redshift to Berlin, Germany. +redshift -rl 53:13 & + +# Launch window manager. +i3 diff --git a/bullseye/home_files/user/mail_sync.sh b/bullseye/home_files/user/mail_sync.sh new file mode 100755 index 0000000..6962800 --- /dev/null +++ b/bullseye/home_files/user/mail_sync.sh @@ -0,0 +1,43 @@ +#!/bin/sh +set -e + +basedir="/home/plom/mail/maildir/" +# Ensure directories exist for all "dir:*" tags. +for tag in $(notmuch search --output=tags '*'); do + if [ ! $(echo "${tag}" | cut -c-4) = "dir:" ]; then + continue + fi + target_dir="${basedir}"$(echo "${tag}" | cut -c5-)"/cur/" + if [ ! -d "${target_dir}" ]; then + echo "Directory ${target_dir} does not exist." + exit 1 + fi +done + +# Ensure all "dir:*"-tagged mails are in proper directories, +# remove all "dir:*" tags. +for tag in $(notmuch search --output=tags '*'); do + if [ ! $(echo "${tag}" | cut -c-4) = "dir:" ]; then + continue + fi + target_dir="${basedir}"$(echo "${tag}" | cut -c5-)"/cur/" + for f in $(notmuch search --output=files tag:"${tag}"); do + new_name=$(basename "${f}" | sed -e 's/,U=[0-9]*//') + target_path="${target_dir}${new_name}" + if [ ! "${target_path}" = "${f}" ]; then + echo "Moving ${f} to ${target_path}." + mv "${f}" "${target_path}" + fi + done + notmuch tag -"${tag}" tag:"${tag}" +done + +# Remove all "deleted"-tagged files from maildirs. +notmuch search --output=files tag:deleted | while read f; do + echo "Deleting ${f}" + rm "${f}" +done + +# Sync changes back to server and update notmuch index. +mbsync -a +notmuch new diff --git a/bullseye/home_files/user/public_repos/repos b/bullseye/home_files/user/public_repos/repos new file mode 100644 index 0000000..27eb028 --- /dev/null +++ b/bullseye/home_files/user/public_repos/repos @@ -0,0 +1,7 @@ +# List of repos we want cloned in ~/public_repos +config +pingmail.git +plomlombot-irc.git +plomrogue +plomrogue2-experiments +plomvi.el diff --git a/bullseye/home_files/w530/.config/i3status/config b/bullseye/home_files/w530/.config/i3status/config new file mode 100644 index 0000000..b9fb15f --- /dev/null +++ b/bullseye/home_files/w530/.config/i3status/config @@ -0,0 +1,82 @@ +# plomlompom's i3 status bar configuration + +# Activate colors; set update interval of one second. +general { + colors = true + interval = 1 +} + +# Selection / order of status elements. +order += "disk /" +order += "disk /home/" +order += "wireless wlp3s0" +order += "ethernet enp0s25" +order += "battery 0" +order += "cpu_usage" +order += "load" +order += "cpu_temperature 0" +order += "time" +order += "volume master" + +# How much space is left in / ? +disk "/" { + format = "/: %avail available of %total" + separator_block_width = 25 +} + +# How much space is left in /home ? +disk "/home/" { + format = "/home: %avail available of %total" + separator_block_width = 25 +} + +# WLAN status: show IP and connection quality or "down". +wireless wlp3s0 { + format_up = "w: (%quality at %essid) %ip" + format_down = "w: down" + separator_block_width = 10 +} + +# Ethernet status: show IP or "down". +ethernet enp0s25 { + format_up = "e: %ip" + format_down = "e: down" + separator_block_width = 25 +} + +# Battery status: show FULL/CHARGING/BATTERY, storage, time left. +battery 0 { + format = "b: %status %percentage %remaining" + separator_block_width = 25 +} + +# Show CPU usage. +cpu_usage { + format = "cpu: %usage" + separator_block_width = 10 +} + +# Show system load during last 1/5/15 minutes. +load { + format = "%1min %5min %15min" + separator_block_width = 25 +} + +# Show CPU temperature in degrees of celsius. +cpu_temperature 0 { + format = "%degrees °C" + separator_block_width = 25 +} + +# Show date/time/timezone as "year-month-day hour:minute:second +# timezone_numeric/timezone_alphabetic". +time { + format = "%Y-%m-%d %H:%M:%S %z/%Z" + separator_block_width = 25 +} + +volume master { + format = "♪: %volume" + format_muted = "♪: muted (%volume)" + separator_block_width = 25 +} diff --git a/bullseye/setup_scripts/setup_desktop.sh b/bullseye/setup_scripts/setup_desktop.sh new file mode 100755 index 0000000..6f4754f --- /dev/null +++ b/bullseye/setup_scripts/setup_desktop.sh @@ -0,0 +1,89 @@ +#!/bin/sh +set -e + +if [ "$#" -ne 1 ]; then + echo 'Need exactly one argument (system name).' + false +fi +if [ ! "$1" = "x220" ] && [ ! "$1" = "w530" ]; then + echo "Need legal system name." + false +fi +system_name="$1" + +# Set up system without user environment. +config_tree_prefix="${HOME}/config/bullseye" +setup_scripts_dir="${config_tree_prefix}/setup_scripts" +cd "${setup_scripts_dir}" +if [ "$1" = "x200s" ] || [ "$1" = "x220" ] || [ "$1" = "w530" ]; then + ./setup.sh "${system_name}" "" user desktop thinkpad "${system_name}" +else + ./setup.sh "${system_name}" "" user desktop "${system_name}" +fi + +# # Set up printer. +# lpadmin -p 'HP_Deskjet_F300_series' -m 'drv:///hpcups.drv/hp-deskjet_f300_series.ppd' -o 'OutputMode=NormalGray' -E +# service cups restart + +# Install Firefox directly from Mozilla. +firefox_release="91.5.0esr" +firefox_filename="firefox-${firefox_release}.tar.bz2" +url_firefox="https://ftp.mozilla.org/pub/firefox/releases/${firefox_release}/linux-x86_64/en-US/${firefox_filename}" +wget "${url_firefox}" +mv "${firefox_filename}" /opt/ +cd /opt/ +tar xf "${firefox_filename}" +rm "${firefox_filename}" +ln -s /opt/firefox/firefox /usr/local/bin/ +update-alternatives --install /usr/bin/x-www-browser x-www-browser /opt/firefox/firefox 200 +update-alternatives --set x-www-browser /opt/firefox/firefox + +# Install Firefox plugins. +# See +extensions_dir="/usr/share/mozilla/extensions/{ec8030f7-c20a-464f-9b0e-13a3a9e97384}/" +mkdir -p "${extensions_dir}" +ublock_version="1.40.8" +ublock_xpi="$uBlock_0{ublock_version}.firefox.signed.xpi" +url_ublock="https://github.com/gorhill/uBlock/releases/download/${ublock_version}/${ublock_xpi}" +wget "${url_ublock}" +name=$(unzip -p "${ublock_xpi}" manifest.json | jq -r .applications.gecko.id) +mv "${ublock_xpi}" "${name}".xpi +tridactyl_version="1.22.0pre6103" +tridactyl_xpi="tridactyl_beta-${tridactyl_version}-an+fx.xpi" +url_tridactyl="https://tridactyl.cmcaine.co.uk/betas/${tridactyl_xpi}" +wget "${url_tridactyl}" +name=$(unzip -p "${tridactyl_xpi}" manifest.json | jq -r .applications.gecko.id) +mv "${tridactyl_xpi}" "${name}.xpi" +mv *.xpi "${extensions_dir}" + +# Set up user environments. +secrets_dev="sdb" +source_dir_secrets="/media/${secrets_dev}/to_usb" +target_dir_secrets="/home/plom/tmp_secrets" +cd "${setup_scripts_dir}" +./copy_dirtree.sh "${config_tree_prefix}/home_files" "/root" minimal root +set +e +HOME_DIR_EXISTS=$([ ! -d "/home/plom" ]; echo $?) +set -e +adduser --disabled-password --gecos "" plom +usermod -a -G sudo plom +passwd plom +if [ "${HOME_DIR_EXISTS}" -eq 0 ]; then + echo "Put secrets drive into slot for /dev/${secrets_dev}." + while [ ! -e /dev/"${secrets_dev}" ]; do + sleep 1 + done + stty -echo + printf "Secrets passphrase: " + read secrets_pass + stty echo + echo "" # newline so user knows their input return was accepted + echo "${secrets_pass}" | pmount /dev/"${secrets_dev}" + cp -a "${source_dir_secrets}" "${target_dir_secrets}" + chown -R plom:plom "${target_dir_secrets}" + pumount "${secrets_dev}" + echo "You can remove /dev/${secrets_dev} now." + cp setup_home.sh /home/plom + chown plom:plom /home/plom/setup_home.sh + SECRETS_PASS="${secrets_pass}" su -c "cd && ./setup_home.sh ${system_name}" plom +fi diff --git a/bullseye/setup_scripts/setup_home.sh b/bullseye/setup_scripts/setup_home.sh new file mode 100755 index 0000000..438ed9a --- /dev/null +++ b/bullseye/setup_scripts/setup_home.sh @@ -0,0 +1,101 @@ +#!/bin/sh +set -e + +if [ "$#" -ne 1 ]; then + echo 'Need exactly one argument (system name).' + false +fi +if [ ! "$1" = "eeepc" ] && [ ! "$1" = "x200s" ]&& [ ! "$1" = "x220" ]; then + echo "Need legal system name." + false +fi +system_name="$1" + +public_repos_dir="${HOME}/public_repos" +config_tree_prefix="${public_repos_dir}/config/bullseye" +path_borgscript="${config_tree_prefix}//borg.sh" +setup_scripts_dir="${config_tree_prefix}/setup_scripts" +repos_list_file="${public_repos_dir}/repos" +dir_secrets="${HOME}/tmp_secrets" +borgkeys_dir=~/.config/borg/keys +borgrepos_file=~/.borgrepos +ssh_dir=~/.ssh +authinfo_file=.authinfo +maildir=~/mail/maildir + +ensure_repo() { + repo_name="${1}" + if [ ! -d "${public_repos_dir}/${repo_name}" ]; then + cd "${public_repos_dir}" + git clone plom@plomlompom.com:/var/repos/${repo_name} + fi +} + +# Set up iniitial non-public parts of infrastructure: SSH authentication. +cd "${dir_secrets}" +mkdir -p "${ssh_dir}" +echo "Setting up .ssh" +cp id_rsa ~/.ssh +stty -echo +ssh-keygen -y -f ~/.ssh/id_rsa > ~/.ssh/id_rsa.pub +stty echo +eval $(ssh-agent) +ssh-add +ssh-keyscan -H "plomlompom.com" >> ~/.ssh/known_hosts + +# Clone config to copy dotfiles etc. from it. +cd +mkdir -p "${public_repos_dir}" +ensure_repo config +cd "${setup_scripts_dir}" +./copy_dirtree.sh "${config_tree_prefix}/home_files" "${HOME}" minimal user "${system_name}" + +# # Set up native messenger for tridactyl. +# version='ef9f02d0da258f68d7faf8898707f6d83d90d07a' +# curl -fsSl "https://raw.githubusercontent.com/tridactyl/tridactyl/${version}/native/install.sh" | bash + +# Set up further non-public parts of infrastructure. +cd "${dir_secrets}" +script -c 'gpg --import secret_keys.asc' /dev/null +tar xf borg_keyfiles.tar +mkdir -p "${borgkeys_dir}" +mv borg_keyfiles/* "${borgkeys_dir}" +# .authinfo may not be present on every secrets drive yet +if [ -f "${authinfo_file}" ]; then + cp "${authinfo_file}" ~ +fi +cd +rm -rf "${dir_secrets}" + +# Sync org dir via borgbackup. For this we need the borgbackup servers +# in our .ssh/known_hosts file. +cat "${borgrepos_file}" | while read line; do + first_char=$(echo "${line}" | cut -c1) + if [ "${first_char}" = "#" ]; then + continue + fi + server=$(echo "${line}" | sed 's/.*@//') + ssh-keyscan "${server}" >> "${ssh_dir}"/known_hosts +done +BORG_PASSPHRASE="${SECRETS_PASS}" "${path_borgscript}" orgpull + +# Fill ~/public_repos. +cat "${repos_list_file}" | while read line; do + first_char=$(echo "${line}" | cut -c1) + if [ "${first_char}" = "#" ]; then + continue + fi + ensure_repo "${line}" +done + +# Set up e-mail system. Note that we only do mbsync if the imap pass file +# is found. It may not be present on every secrets drive yet, so we have to +# deal with the possibility of it being absent at this point. +mkdir -p "${maildir}" # expected by mbsync/isync +if [ -f "${HOME}/${authinfo_file}" ]; then + mbsync -a + notmuch new +fi + +# Final note on how to integrate tridactyl. +echo "TODO: As tridactyl user, don't forget to do :source on the first Firefox run, wait a little while (Tridactyl needs to walk through all commands in the .tridactylrc) and then re-start."